GMI Shipsurveyor - Probe Connection and Operating Modes; Switching ON Operating Modes

3-3
OPERATION
3.3 Probe Handle / Quick Connect
The SHIPSURVEYOR instrument is equipped to accept
probe types listed in Chapter 7 ‘Accessories’.
Fig. 3-3 Probe Connection
3.4 Operating Modes - Switch ON
The SHIPSURVEYOR is a dual conguration instrument.
It operates as a Conned Space Monitor (CSM) or as a
Combustible Gas Indicator (CGI) depending on the button
used to switch it on.
For Confined Space Monitor (CSM) operation, the
instrument must be switched on by pressing and holding the
Bottom Button for approximately one second in fresh air.
For Combustible Gas Indicator (CGI) operation, the
instrument must be switched on by pressing and holding
the Top Button for approximately one second in fresh air.