3-18
USER HANDBOOK
3.10 Sensor Zeroing
The nal feature in the instrument warm-up cycle is sensor
zeroing.
During this check, the screen illustrated in Fig. 3-28 is
displayed.
Fig. 3-28 Sensor Check Display
When all sensors have been correctly zeroed, the instrument
is ready for use.
3.10.1 Instrument Will Not Zero - Zero Fault
If a sensor fails to zero because of a fault, the screen
illustrated in Fig. 3-29 is displayed, providing the user with the
option to continue working and use the remaining operational
sensor(s). (Details of the failed sensor will be datalogged).
Fig. 3-29 Failed Sensor Display
To Next Page
Loading...