4-9
ALARMS
To mute the non-latching alarm:
• Press and hold ‘MUTE’ (Bottom Button) for one
second.
4.5 Fault Alarms
The SHIPSURVEYOR instrument features a series of fault
alarms to alert the user that the instrument is not functioning
correctly. The audible and visual indications used are both
fault / type and mode (CSM or CGI) dependent.
Visual alarms are indicated by a series of LED’s, as illustrated
in Fig. 4-6. The power ON LED will remain illuminated during
all fault alarm indications.
SHIPSURVEYOR
4 RED LED's - USED TO INDICATE FAULTS
POWER ON
(GREEN) LED
FAULT LED
(YELLOW)
Fig. 4-6 Instrument LED Panel
To Next Page
Loading...