EasyManua.ls Logo

GMI Shipsurveyor - Operator Maintenance - Batteries; Battery Replacement Scenarios

Default Icon
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5-1
OPERATOR MAINTENANCE
5.1 Batteries
The SHIPSURVEYOR contains two alkaline or rechargeable
batteries that provides the power required to operate the
instrument.
The alkaline batteries should be replaced, or the rechargeable
batteries recharged in the following situations:
• The‘LO-BAT’agisashinginthedisplay.
Indicates that the remaining operating time of the
instrument is low.
• The‘BAT’agisashinginthedisplay.
Indicates exhausted batteries and automatic switch-
off.
The procedure to remove / discard alkaline cells or to remove
rechargeable cells for charging is detailed in paragraph
5.1.1.Re-ttingofthecellsisalsoincludedinthisparagraph.
The rechargeable cells should be charged using a
commercialtypecharger.
5

Table of Contents