3-10
USER HANDBOOK
Fig. 3-14 Calibration Overdue
The user must acknowledge that Cal Due date has
expired.
Note: The extended period can be set from 1 to 31
days.
To accept extended expiry (continue):
•
Press YES (Top Button) to continue
the warm-up cycle.
Note: When the extended period option expires, the
user will be forced to switch the instrument
OFF.
To reject the extended expiry:
• Press NO (Bottom Button) .
The screen, illustrated in Fig. 3-15, is displayed.
Fig. 3.15 Calibration Expired
To Next Page
Loading...