System information
► The three fields Name, Location and Contact can be individually filled in to provide
information about the LEDI
®
Network TDS in the variables “sysContact”, “sysName” and
“sysLocation” of the classic .iso.org.dod.internet.mgmt.mib-2.system branch.
► Use the community field for SNMP versions 1 and 2c. The community of the SNMP
client connecting to the server must match this field for the server to respond to the
request.
► The default SNMP name for the LEDI
®
Network TDS (visible in an SNMP browser and
GTNetworkManager 2) is LEDI
®
NETWORK TDS nnnnnn where nnnnnn is the 6-digit
serial number.
► The default SNMP name for an additional NTP output is NTP SERVER OUTCARD a
nnnnnn where a is the a is the address of the card on the output bus and nnnnnn is the
LEDI
®
Network TDS 6-digit serial number. You can also find the address of the card in
the “Output” Web page of the Ethernet interface of the time server management.
Security options & SNMPv3 credentials
► The LEDI
®
Network TDS uses an SNMPv3 compatible server with security options.
► You can choose to disable SNMPv1 and SNMPv2c by checking the corresponding box.
Doing so will mean that the server will not respond to any SNMPv1 or SNMPv2c
requests.
To Next Page
Loading...