9
1. Lift the top layer of packaging and place it beside the bottom layer that holds the machine.
2
1. Use the handles to lift the bottom layer of packaging out of the box. Make sure to place it on
top of the rst layer of packaging so that the following items are lined up correctly:
• The bottom of the machine is over the cutouts in the side of the rst layer of foam
• The holes in the bottom corners line up with the tabs on the top of the rst layer of foam
3
Cutouts
Tabs (x4)
Note: To avoid risk of injury to yourself or damage to the machine, it is
highly recommended that this step be completed with two people, one
lifting each side of the second layer of packaging.
Task 2 - Installing the Wheels (continued)
Part Two | Out of Box Assembly
Handles
To Next Page
Loading...
Need help?
General
