12
Congratulations! You have completed Part Two of this manual.
If you are also installing QuiltMotion, complete Part Two of your
QuiltMotion manual.
If you are not installing QuiltMotion at this time but are assembling
a new frame, continue to Part Two of your frame manual. If
the frame manual is not broken in to parts, follow the manual’s
directions to:
• Install the channel lock onto your machine.
If you are installing your machine onto a frame that is already fully
assembled, continue to Part Three of this manual on page 13.
1. Roll the machine up and down the bottom carriage tracks several times so that the machine can
settle and ride smoothly.
10
1. Use the 4 mm Allen wrench to re-tighten the wheel assembly set screws you loosened earlier.
11
Set Screws
Part Two | Out of Box Assembly
Task 2 - Installing the Wheels (continued)
To Next Page
Loading...
Need help?
General
