Name: Grace Q'nique 16X Elite
Brand: Grace
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1. Attach the back wheel assembly to the bottom of the machine with the two M6 x 35 SBHCS

and the 4 mm Allen wrench. Make sure the holes in the back of the wheel assembly are facing

towards the back.

SBHCS M6 x 35mm (x2)

Holes

1. Remove the machine from the packaging and place it on the bottom carriage on the frame.

1. Use the 4 mm Allen wrench to loosen the set screws on one side of each of the wheel

assemblies.

Set Screws

Task 2 - Installing the Wheels (continued)

Part Two | Out of Box Assembly

Questions and Answers:

Need help?

Do you have a question about the Grace Q'nique 16X Elite and is the answer not in the manual?

Grace Q'nique 16X Elite Specifications

General