55
6
Part Four | Quilting
Whenever you approach or cross the boundaries while quilting, an alarm will sound, a red LED
light will shine on the needle area, and the edge warning symbol on the left side of the main
quilting screen will turn red. These alerts persist until you return to the established “safe area.”
Note: Edge Warning is automatically deactivated in Baste Mode.
The light and the alarm can each be deactivated in the settings screen (see page 40).
7
To hide the edge warning symbol on the quilting screen, turn o the edge warning tool from the
edge warning screen. This will also deactivate the warning light and alarm.
Using the Edge Warning (continued)
To Next Page
Loading...
Need help?
General
