Repair
44 3A4399A
6. Grease piston packings.
7. Slide piston assembly into bottom of sleeve.
8. Grease top inch or two of piston rod that will go
through the cylinder throat packings.
9. Grease o-rings (221) and place on sleeve. Slide
sleeve/piston rod assembly into bottom of cylinder.
Replace o-ring (207) if desired.
NOTE: O-ring (207) is not required for safe pump
operation.
NOTICE
Do not slide piston assembly into top of sleeve as this
may damage piston packing.
To Next Page
Loading...
