Graco LineLazer V 200HS - Page 13

Setup/Startup
3A3426EOperation 13
10. Start engine:
a. Move fuel valve to open.
b. Move choke to closed.
c. Set throttle to fast.
d. Set engine switch to ON.
e. Pull starter cord.
11. After engine starts, move choke to open.
12. Set throttle to desired setting.
13. Digital display is functional after engine starts.
ti27616a
ti27617a
ti27618a
ti28151a
ti27619a
ti27620a
ti27766a
ti27618a
ti28152a