Parts
312780K 65
ProMix 2KS Automatic RoboMix Panel System
Configurator Key
The configured part number for your equipment is printed on the equipment identification labels. See the
illustrations below for location of the identification labels. The part number includes one digit from each of
the following six categories, depending on the configuration of your system. The digits in this table do not
correspond to ref. nos. in the parts lists or parts drawings.
Auto-
matic Sys-
tem
Control and Display A and B Meter Color Valves Catalyst Valves Flow
Control
R D = EasyKey with LCD Display 0 = No Meters
1 = G250 (A and B)
2 = G250HR (A and B)
0 = No Valves
(single color)
1 = Two Valves
(low pressure)
2 = Four Valves
(low pressure)
3 = Seven Valves
(low pressure)
4 = Twelve Valves
(low pressure)
0 = No Valves
(single catalyst)
1 = Two Valves
(low pressure)
2 = Four Valves
(low pressure)
N = No
Y = Yes
Label Location
on EasyKey
Label Location on
RoboMix Panel
Maximum Fluid
Working Pressure
is listed here
TI12418aTI12512a
6-Digit Configured Part No.
To Next Page
Loading...
Need help?
General
