Troubleshooting
312780K 17
Troubleshooting
NOTE: Do not use the fluid in the line that was dis-
pensed off ratio as it may not cure properly.
Alarm Codes
Table 1 lists the system alarm codes. See the system
operation manual for complete information on alarm
troubleshooting.
Follow Pressure Relief Procedure, page 14, before
cleaning, checking, or servicing equipment.
Table 1: System Alarm Codes
Code Description
E-1 Communication Error Alarm
E-2 Potlife Alarm
E-3 Ratio High Alarm
E-4 Ratio Low Alarm
E-5 Overdose A/B Dose Too Short Alarm
E-6 Overdose B/A Dose Too Short Alarm
E-7 Dose Time A Alarm
E-8 Dose Time B Alarm
E-9 Mix in Setup Alarm
E-10 Remote Stop Alarm
E-11 Purge Volume Alarm
E-12 CAN Network Communication Error Alarm
E-13 High Flow Alarm
E-14 Low Flow Alarm
E-15 System Idle Warning
E-16 Setup Change Warning
E-17 Power On Warning
E-18 Defaults Loaded Warning
E-19 I/O Alarm (see Operation Manual for details)
E-20 Purge Initiate Alarm
E-21 Material Fill Alarm
E-22 Tank A Low Alarm
E-23 Tank B Low Alarm
E-24 Tank S Low Alarm
E-25 Auto Dump Complete Alarm
E-26 Color/Catalyst Purge Alarm
E-27 Color/Catalyst Fill Alarm
To Next Page
Loading...
Need help?
General
