Graco SlimFit3 LX User Manual

Forward-Facing with LATCH
5-C
63
5. Place Car Seat Forward-Facing in Back
Seat of the Vehicle
Place forward-facing in vehicle seat and
center the car seat between the lower
anchors. The base should sit as flat as
possible on the vehicle seat.
7. Extend the Lower Anchor Strap
For easier installation, extend the lower anchor
strap to its maximum length by pressing the
grey button and pull out on the strap.
6. Make Sure Base is a minimum of 80% on
Vehicle Seat.
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 63NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 63 9/18/20 11:49 AM9/18/20 11:49 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4