Graco SlimFit3 LX User Manual

Moving Lower Anchor Attachment
8
94
5. Push the Lower Anchor Connectors Out
Through the Rear-Facing Belt Path Openings
on Each Side of Car Seat
Rear-Facing: Make
sure the Lower Anchor
Strap is in front of the
buckle strap when the
buckle is in the inner-
most or middle position
(A), and in behind
when in the outer-most
position (B) and that it is flat and is not twisted.
Forward-Facing: Make sure the Lower Anchor
Strap is routed behind the harness strap, is flat,
and is not twisted.
Rear-
Facing
Forward-
Facing
A B
NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 94NWL0001077519C SlimFit3 LX USA ENG R04 (8BZ20.indd 94 9/18/20 11:50 AM9/18/20 11:50 AM

Graco SlimFit3 LX Specifications

General

Product Type	3-in-1 Car Seat
Rear-Facing Weight Capacity	5-40 lbs
Forward-Facing Weight Capacity	22-65 lbs
Booster Mode Weight Range	40-100 lbs
Height Capacity	Up to 57 inches
Harness Type	5-point harness
Harness Positions	10
Side Impact Protection	Yes
Cup Holders	2
Machine Washable Cover	Yes
Weight Capacity	5-100 lbs
Installation	LATCH
Recline Positions	4