Grandstream Networks WP810 - Network Settings Page Definitions; Network;Basic Settings; Network;Advanced Settings

P a g e | 48
WP810 Administration Guide
Version 1.0.7.83
 Call-Waiting Tone
Call Waiting Tone Gain
Configures the call waiting tone gain to adjust call waiting tone volume.
Default is “Low”.
Network Settings Page Definitions
Network /Basic Settings
Host name (Option 12)
Specifies the name of the client. This field is optional but may be required by
Internet Service Providers.
Vendor Class ID
(Option 60)
Used by clients and servers to exchange vendor class ID.
Network /Advanced Settings
HTTP Proxy
Specifies the HTTP proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.
HTTPS Proxy
Specifies the HTTPS proxy URL for the phone to send packets to. The proxy
server will act as an intermediary to route the packets to the destination.
Bypass Proxy For
Enter host names that do not require a proxy to reach. Those names should
be separated by commas.
Layer 3 QoS for SIP
Defines the Layer 3 QoS parameter for SIP. This value is used for IP
Precedence, Diff-Serv or MPLS. Default is 26.
Layer 3 QoS for RTP
Defines the Layer 3 QoS parameter for RTP. This value is used for IP
Precedence, Diff-Serv or MPLS. Default is 46.