Grandstream Networks WP810 - Call Management

P a g e | 52
WP810 Administration Guide
Version 1.0.7.83
The following files will override the files that has already been load and
processed.
Download User
configuration
This allows users to download part of the configuration that does not include
any personal settings like Username and Passwords. Also, it will include all
the changes manually made by user from web UI, or config file uploaded
from “Upload Device Configuration”, but not include the changes from the
server provision via TFTP/FTP/FTPS/HTTP/HTTPS.
Upload Device
Configuration
Uploads configuration file to phone.
Export backup
Package
Export backup package which contains device configuration along with
personal data.
Restore from Backup
package
Click to upload backup package and restore.
Firmware
Firmware Upgrade Via
Allows users to choose the firmware upgrade method:
TFTP, FTP, FTPS, HTTP or HTTPS. The default setting is “HTTPS”.
Firmware Server Path
Defines the server path for the firmware server.
Firmware Server
Username
The username for the firmware server.
Firmware Server
Password
The password for the firmware server.
Firmware File Prefix
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted prefix will be downloaded and flashed into the
phone.
Firmware File Postfix
Enables your ITSP to lock firmware updates. If configured, only the firmware
with the matching encrypted postfix will be downloaded and flashed into the
phone.
Maintenance/Syslog
Syslog Protocol
If set to SSL/TLS, the syslog messages will be sent through secured TLS
protocol to syslog server.
Default setting is UDP.
Note: The CA certificate is required to connect with the TLS server.
Syslog Server
The URL or IP address of the syslog server for the phone to send syslog
to.
Note: By adding port number to the Syslog server field (i.e.
172.18.1.1:1000), the phone will send syslog to the corresponding port of
that IP.
Syslog Level
Selects the level of logging for syslog.