4-2
Specifications
4.1 Standard Specifications
Standard Specifications
Internal Memory Devices
PC Interface
Monitor
Item Description
Number of analog input 1 unit (10 channels)
External input/output Trigger input, Logic input 4 channels or Pulse input 4 channels, Alarm output
PC Interface
Ethernet (10BASE-T/100BASE-TX), USB (FullSpeed supported) provided as standard features
Internal memory devices Internal memory: Approx. 14 MB
USB memory slot (FullSpeed supported) provided as a standard feature
Data backup functions Setup conditions: EEPROM; Clock: Lithium secondary battery
Clock accuracy (23°C environment)
±0.002 % (approx. 50 seconds per month)
Operating environment 0 to 50°C, 5 to 85 % RH
Withstand voltage Between each input channel and GND : 1 minute at 350 Vp-p
Between each input terminal : 1 minute at 350 Vp-p
Between AC input and GND : 1 minute at 2000 VAC
Between alarm terminal and GND : 1 minute at 1000 VAC
Insulation resistance Between AC input and GND : 20M or higher (500VDC)
Between alarm terminal and GND : 50M or higher (500VDC)
Between each input channel and GND : 50M or higher (500VDC)
Power supply AC input : 100 to 240 VAC/50 to 60 Hz
Terminal type : M4 screw type terminals
Power consumption
* Normal status is when LCD brightness is set to MAX.
External dimensions 144 x 144 x 200 mm
Weight 2.1 kg
Vibration-tested conditions Protective class : IP65 compatible (surface panel only)
Vibration : Equivalent to automobile parts Type 1 Category A classification
AC power consumption
No. Condition
1 When the LCD is ON 38VA
2 When the screensaver is operating 30VA
Item Description
Memory capacity Internal memory : Approx. 14 MB Flash Memory
USB memory : Max 2 GB (depends on the type of USB memory used)
Memory contents Setup conditions, measured data, screen copy
Item Description
Display 5.7-inch TFT color LCD (QVGA: 320 x 240 dots)
Displayed languages Japanese, English, Others
Backlight life 40,000 hrs (when brightness is down to 50 %), depends on operation environment
Backlight Screen saver function provided (10, 30 sec; 1, 2, 5, 10, 30, 60 min.)
Off during operation, resumed by key operation and alarm
Item Description
Interface types Ethernet (10BASE-T/100BASE-TX)
USB (FullSpeed)
Software functions Data transfer to the PC (realtime, memory)
PC control of the MT100
Ethernet functions
Web server function : Displays MT100's screen image on Web browser, operation of MT100
(10BASE-T/100BASE-TX)
FTP server function : Transfers and deletes files from internal memory and USB memory
FTP client function : Supports backup of data ininternal memory and USB memory
NTP client function : Adjusts internal clock
USB functions USB drive mode : Transfers and deletes files from internal memory
Realtime data transfer speed 100 msec/10 ch maximum
To Next Page
Loading...