1-2
General Description
1.1 Overview
The MT100 (with color monitor and internal memory) are compact, lightweight, multi-channel paperless
recorders.
MT100 are also equipped with an internal flash memory to store data and enable the direct capture of a large
volume of data to USB memory.
Furthermore, the MT100 are equipped with USB and Ethernet interfaces to a PC to enable system
configurations according to your application.
The Ethernet feature includes WEB and FTP server functions which allow monitoring from a remote location
and data transfer.
1.2 Features
Input/Output
(1) Adoption of M4 screw type input terminals facilitates wiring.
(2) All channels are isolated, enabling measurement of signals of different references.
(3) Relay contact output is provided as a standard feature, enabling easy application as alarm
output.
Display & Operation
(1) With the MT100's 5.7-inch TFT color liquid crystal display, you can confirm the waveforms of
measured data and each channel's settings at a glance.
(2) Easy operation is achieved through a straightforward menu structure and key allocation which
resembles mobile phones.
(3) Waveforms are displayed in a format similar to those of recording papers in analog-type
recorders, allowing quick reference of previous states.
Data Capture
(1) Data can be directly captured and maintained in the internal or USB memory.
(2) Internal memory used for the built-in memory maintains captured data even after the power is
turned off.
(3) The Internal memory can be used with disk images thus multiple data items can be
maintained.
(4) The MT100 is equipped with resume feature that may be used in case of power discontinuity.
If power is cut off during the capturing of data and then later resumed, this feature will start
recapturing under the same conditions used before the power was cut off.
(5) USB memory can be replaced without terminating the data capture operations. This allows
any part of the data to be extracted during long capture operations.
To Next Page
Loading...