3-10
Settings and Measurement
(8) DISPLAY
This key is used to switch data display modes.
You can switch the display modes during free running (when stopped) and capturing.
Pressing this key switches display modes as follows:Pressing this key switches display modes as follows:
<Waveform + Digital Screen>
Displays waveforms and digital values.
This is the initial screen after device is powered ON.
<Digital + Calculation Display screen>
Displays digital values and calculation results in large
text.
Calculation results are added up in real time.
For details on calculations, see section 3-23.
<Bar Graph screen>
Displays measured data as bar graphs.
You can select reference points of the bar graphs.
For details, see section 3-30.
To Next Page
Loading...