GRAPHTEC MT100 - Key Operation; Cursor (Alm Clr)

3-6
Settings and Measurement
3.2 Key Operation
This section describes key operation.
(1) CURSOR (ALM CLR)
Function of this key will vary according to the operation status.
<During replay>
This key is used to toggle between cursors A and B displayed during replay.
<During free running and data capturing>
When the alarm setting is "Hold generated Alarm", the maintained alarm is cleared.
（1）CURSOR
（10）REVIEW
（2）SPAN/TRACE/POSITION
（5）MENU
（3）QUIT
（9）TIME/DIV
（8）DISPLAY （7）ENTER
（6）START/STO
P
(4)Directionkeys
CursorA
CursorB
Alarmgenerated Alarmcleared