3-13
Settings and Measurement
(2) Capturing
During data capture, data is captured into the Internal memory or USB device.
Changing settings, except for some functions, using the MENU key will be disabled.
Operations available during capture
(3) Dual View Replaying
You can replay data during capture.
Waveform displayed in the upper screen (right screen, when set to horizontal scroll) is the currently
captured data, and the lower screen (left screen, when set to horizontal scroll) is the previously
captured data.
Operations available during dual view replaying
CAUTION
• During dual view replay, only the previously captured data can be zoomed in/out using the TIME/DIV
key. The view returns to its original scale when you quit replay.
• During dual view replay, the previous data will only be partly displayed.
In this case, compressed data preparation bar is displayed.
(compressed data will be displayed when ready).
Time of Capturing
Capture file name
Capture time
Note: "+++++:++:++" is displayed when the capture time is long.
SPAN/TRACE/POSITION The SPAN/TRACE/POSITION key is used to change settings.
Display mode The DISPLAY key is used to change the display mode.
Dual View replay
The REVIEW key is used to replay captured data in two windows at the same time.
Moving cursor The CURSOR key is used to switch between cursors A and B.
The ( ) keys are used to move the cursors.
The TIME/DIV key is used to zoom in/out.
To Next Page
Loading...