2-3
Checks and Preparation
2.3 MT100 Part Names and Functions
This section describes the names and function of parts of the MT100.
Opening the Control Panel Cover
As shown in the following figure, hold the tab in the center of the control panel cover and pull it in the
direction indicated by an arrow to open the cover.
Closing the Control Panel Cover
There are two locks on the cover, indicated by the arrows in the figure below. After you close the cover,
lightly press these two locations to make sure the cover is locked.
Front panel
Monitor
Control panel cover
Control panel cover
Control panel keys
Operation status LED
・POWER : ON when the power is ON
・START : ON during data cpture
To Next Page
Loading...