1-6
General Description
1.6 Changing the Display Language
The language selection menu will be displayed when this device is powered ON for the first time.
Set the display language as required.
Language settings can be changed at any point.
You can change the display language under Language setting in OTHR menu.
1.7
Notes on Installation category (over-voltage category)
This equipment is suitable for use only within measurement category I,
WARNING
Do not use the equipment for measurements within measurement categories II, III and IV.
This equipment is designed for input voltages up to 50 VDC, do not connect input voltages that might exceed
this maximum input voltage. If the input voltage should exceed 60 VDC for a prolonged period it may result in
risk of injury to the operator and damage to the equipment.
To Next Page
Loading...