General Description
1-3
Data Control & Processing
(1) The application software provided lets you set conditions and monitor data on a PC.
(2) The USB drive mode function enables the MT100's internal memory to be recognized as an
external drive by your PC. (Connect the MT100 to your PC and turn on the power supply to the
MT100 while holding down the [START] key.)
(3) Captured data can be read from the application software to files and displayed for processing.
(4) Data can be transferred off-line to a computer using USB memory.
(5) The WEB server function enables control and monitoring from a remote location without using
dedicated software.
(6) The FTP server function enables handling internal memory and USB memory data from a PC.
(7) Measurement data can be backed up to an FTP server using the FTP client function.
(8) Time information can be adjusted through the NTP client function.
Operating Environment
(1) The front panel is dust/water resistant (IP65 compatible) to withstand harsh measurement
environments.
To Next Page
Loading...