3-9
Settings and Measurement
(6) START/STOP (USB DRIVE)
Pressing this key will perform either of the following two operations.
<Start/Stop measurement>
• Pressing this key during Free Running will start data capture.
• Pressing this key during data capture will stop capture.
<USB Drive Mode>
In USB Drive Mode, the internal memory is recognized by the PC as an external storage media.
It is acknowledged as a removable disk, which facilitates operations such as file transfer and deletion.
(1) Use a USB cable to connect the MT100 and PC.
(2) While pressing the MT100 START/STOP key, turn the power ON.
(3) The external storage media is recognized by the PC, and data exchange becomes possible.
*In USB Drive Mode, the following screen is displayed.
CAUTION
• To cancel the USB Drive Mode, reboot the MT100.
• All operations, including data capture and replay, will be disabled during USB Drive Mode.
(7) ENTER
This key is used to finalize setting items during menu configuration or to open submenus.
To Next Page
Loading...