3-3
Settings and Measurement
Status Section
(1) Simplified message display
Displays the operation status of the device.
• Free Running :
Displayed when the device is powered ON or not performing data capture.
• Armed : Displayed when the device is waiting for a trigger to be generated after
starting measurement (no data captured at this point).
• Memory Recording : Displayed while data is captured into the device's internal memory.
•
USB Drv Recording
: Displayed while data is captured into the USB memory.
• Memory Review : Displayed while data in the device's internal memory is being replayed.
• USB Drive Review : Displayed while data in the USB memory is being replayed.
(2) Time/DIV display
Displays the current time scale.
(3) Status display
• USB memory status display
: USB memory is not connected.
: USB memory is connected, but not accessed.
: USB memory is being accessed.
CAUTION
Do not remove the USB memory and/or turn OFF the device while the USB memory is being accessed.
Failure to observe this caution may result in corrupted data and data loss.
• Internal memory status display
: Internal memory is not accessed.
: Internal memory is being accessed.
CAUTION
Do not turn OFF the device while the internal memory is being accessed.
Failure to observe this caution may result in corrupted data and data loss.
• Key lock status display
: Keys are not locked. Normal key operations are allowed.
: All keys are locked.
For details on the key lock feature, see section 3-45.
• Remote status display
: Local mode. Operation from the device is allowed.
: Remote mode. Most operations are conducted from the PC.
Disconnecting from the PC automatically sets the device back to local mode.
If the mode does not return back to local mode when disconnecting the PC,
press the QUIT key.
To Next Page
Loading...