GRAPHTEC MT100 - Setting Menus

3-15
Settings and Measurement
3.4 Setting Menus
When you press the MENU key during Free Running, the following menu screens appear.
The menu screens are classified by the tab for each setting item.
(1) AMP settings
This menu is used to specify input signal-related settings.
AMP DATA TRIG DISP MARK FILE USER I/F OTHR
Items Settings 1 Settings 2 Selections available
Input Off, DC(Voltage), TEMP(Temperature), RH(Humidity)
Range DC 20, 50, 100, 200, 500 mV, 1, 2, 5, 10, 20, 50, 1-5 V
TEMP TC-K, TC-J, TC-T, TC-R, TC-E, TC-B, TC-S, TC-N, TC-W
Pt100, JPt100, Pt1000
Filter Off, 2, 5, 10, 20, 40
EU Function Off, ON
(Scaling settings) Meas. Value
(Upper/Lower) enter numerical value
EU Value (Upper/Lower) enter numerical value
Dec pt 1, 10, 100, 1000, 10000
Select Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy,
Pressure, Flow, Temp
Choose select
Unit enter text
Misc. CALC. Settings CALC. Off, ON, D/W (CH2 only, calculate with dry bulb CH1/wet bulb CH2)
Operation CHn (+, -, ∗, /) CHn
Scaling / 1000000, / 1000, x 1, x 1000, x 1000000
Upper/Lower enter numerical value
Dec pt 1, 10, 100, 1000, 10000
Select Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy,
Pressure, Flow, Temp
Choose select
Unit enter text
Span settings Upper/Lower enter numerical value
Annotation string enter text (max. 11 characters)
Perform Auto Zero ADJ. Execute
Reset Auto Zero ADJ. Execute
Logic/Pulse Logic/Pulse Off, Logic, Pulse
Logic Filter Off, ON
Pulse Input Off, Revol., Counts, Inst.
Filter Off, ON
Slope H, L
EU Function Off, ON
Meas. Value enter numerical value
EU Value enter numerical value
Select Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy,
Pressure, Flow, Temp
Choose select
Unit enter text