2-8
Checks and Preparation
(2) Connect the Power cable and protective ground cord to the power terminal.
Use non-insulated solderless ring terminals (for 4 mm screw) and insulation caps.
Recommended screw torque is 12 to 14 kgf/cm.
(3) Close the power terminal (transparent) cover and fix it with screws.
(4) Open the front panel and turn the power switch ON to power on the device.
Power switch
Functional
ground terminal
Protective
ground terminal
Protective
ground cord
Power cables
Non-insulated
solderless ring terminals
Insulation caps
To Next Page
Loading...