3-21
Settings and Measurement
(1)-6 Pulse EU settings
CAUTION
• If a message appears, follow the instructions by reducing the number of digits to be output by one, or
leaving the number of digits as is and changing the EU value.
• The Scaling operation is calculated using a ratio of the Meas. Value or EU Output Value settings.
"++++/----" is displayed when the converted value cannot be processed by MT100.
Span may be changed according to the value set for Scaling.
(2) DATA settings
This menu is used to specify capture-related items and calculations.
①
②③
④⑤
⑥
Setting items Description
(1) Function Selects ON/OFF of the scaling function.
(2) Meas. Value Sets the upper value of the numeric value to be converted
(3) EU Value Sets the upper output value after conversion.
(4) Select Selects the type of engineering unit (from the following)
Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy, Pressure, Flow, Temp
(5) Choose Selects the converted unit.
The unit displayed here is the unit type selected in the Select settings.
To set a unit that is not displayed here, you can enter text in the Unit settings to set a new unit.
The unit set here will be displayed in Unit.
(6) Unit Selects the converted unit, which can be specified as a user-defined character string consisting
of alphanumerics.
Unit parameter can also be specified by selecting a unit in Select.
Items Settings 1 Settings 2 Selections available
Record Settings Sampling Interval 100, 125, 200, 250, 500 ms, 1, 2, 5, 10, 20, 30 s,
1, 2, 5, 10, 20, 30 min, 1 h
File Name File Name Capture destination : MEM, USB1
Folder : enter text string
File Name : enter text string
(when Name Type is set to Auto)
Name Type Auto, User, SN
File Type GBD, CSV
Backup Settings Backup Intervals Off, 1, 2, 6, 12, 24 h
Backup Desination
Backup Desination
USB1, FTP
Folder Name enter text string
Statistical Calculation
Calc. settings 1 Off, Average, Max, Min, Peak, RMS
Calc. settings 2 Off, Average, Max, Min, Peak, RMS
To Next Page
Loading...