GRAPHTEC MT100 - Page 97

3-58
Settings and Measurement
(Ex.4) Creating a folder for data capture
The following procedure shows how to create a folder in the memory device to capture data.
This setting allows data to be captured into a file automatically created in a folder inside the internal Flash
memory.
(1) Press the MENU key to open the DATA menu.
(2) Use the key to move the cursor to File Name and press the ENTER key.
(3) Press the ENTER key in Folder.
(4) Use the TIME/DIV key to select Create new folder.
SelecttextstringChangefields Confirmtextstrin
g
Movecursor Confirm