EasyManua.ls Logo

Graphtech Ghost - Signal;Ground Color Code; Summing Board; Extension Harness *Optional

Graphtech Ghost
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43
Use the colored wire on the Extension Harness to make
sure it is oriented properly, extending the pickup wires
without reversing them. The blue wires of the pickups must
be connected to the ground side on the ghost® boards.
Extension harness *optional*
The silver wire is signal; the blue wire is ground. If you cant tell
which is which, try holding the wire at a dierent angle, or in a
dierent light.
Signal/ground color code
Connects all the saddle pickup signal wires together, and all
the ground wires together, then the Dual Connector Cable (a
small wire with a plug on each end) connects the Summing
Board to the Acousti-Phonic. Note the Summing Board and Dual
Connector Cable are not used when installing the Hexpander,
or when the Hexpander is piggybacked on the Acousti-phonic.
Summing Board

Table of Contents