69
* not sold by Graph Tech -- available from most guitar parts suppliers
The bridge radius should match the ngerboard radius in order
to prevent “fretting out” -- fret buzz or wrong notes sounding
when you play high up
the neck. The ResoMax®
bridge assembly is
manufactured with a
xed radius of 12”. Do
not le ghost® pickup
saddles to adjust the
radius, as this will change
the output levels unpredictably. The LB63 has a radius of 20”, and this
can be adjusted by inserting shims* under saddles that are too low.
Bridge radius - Do not le saddles!
To Next Page
Loading...