66
When installing both boards, connect them together with the
Hexpander on top and Acousti-Phonic on the bottom. Plug the
row of pins on the Acousti-Phonic into the matching receptacle
on the bottom of the Hexpander. The boards will align, and the
blue and white screwdriver adjustment on the Acousti-Phonic
will be accessible through the hole in the Hexpander board.
Piggyback -- Hexpander + Acousti-Phonic
You can have two 1/4” output jacks on your guitar with
magnetic on one, and acoustic on the other. The Acousti-
Phonic’s mono (blended) mode does not function in this
conguration, as the magnetic pickups do not go through the
Acousti-Phonic. Visit www.graphtech.com for wiring diagrams.
Dual output jacks
The ghost® system is quite versatile, and the installation
described in this manual is by no means the only
possibility. Included below are a few of the most
popular alternatives to the standard installation.
Other Possible Installations
To Next Page
Loading...
Need help?
General