Need help?Do you have a question about the Graphtech Ghost and is the answer not in the manual?
General| Brand | Graphtech |
|---|---|
| Model | Ghost |
| Category | Accessories |
| Language | English |
Details compatibility of the ghost® system with various guitar types and bridge styles.
Explains the modular nature of ghost® system components and their interconnections.
Describes how to connect the ghost® system to amplifiers using mono, stereo, or 13-pin MIDI cables.
Guidance on finding suitable locations for ghost® system boards within guitar cavities.
Method to convert a tone pot into an acoustic volume control using the supplied harness.
Alternative method to add acoustic volume using a stacked or concentric pot.
Procedure for drilling a new hole to install an acoustic volume pot.
Guidance on preparing the guitar body for the 13-pin jack using templates and drilling.
Guidance on installing ghost® pickup saddles and handling their wires.
Properly setting up ghost® saddles for optimal performance and tone.
Guidance on locating and mounting the Hexpander board in the guitar cavity.
Steps for bolting the 13-pin jack plate and aligning the Traktion switch.
Importance of matching bridge radius and avoiding filing of ghost® pickup saddles.
Methods for grounding guitar strings to prevent hum, especially on Tune-O-Matic bridges.
Strategies for preventing ground loops by using a central ground point in a star pattern.
Addressing potential noise issues caused by shielded control cavities and preventing ground loops.
To Next Page