44
Ghost® saddles are designed to be set up just like the regular
saddles they replaced. For optimum performance, make sure that
both height adjustment screws are set so that the saddle pickup
is level (Strat, Tele, and PRS), and that the string is not obstructed
in any way as it passes over or through the saddle. Mechanical
interference near the saddle can cause string balance problems
or false MIDI triggering. On ResoMax® bridge installations,
adjust the height of the tail piece so that the strings do not
contact the bridge behind the saddles. The ghost® ResoMax®
bridge must be installed with the intonation screws facing away
from the tail piece or string anchor points. Reversing the bridge
will reduce the string vibration sensed by the saddle pickups.
Seating and setup
To Next Page
Loading...
Need help?
General