Planning Guide
66 Planning and Installation Manual
The next example applies to existing systems where re-arrangement of
cables in a sequential pattern is not practical or desirable:
Notice that in all cases the primary path I/O numbers are always in the
1-128 range while the secondary path I/O numbers are always in the
129-256 range.
Table 8. DV-33256 protected paths (example of non-sequential numbering)
Primary path Secondary path
Out In Out In
Name No. Name No. Name No. Name No.
AirPP 21 MCPP 12 AirSP 190 MCSP 165
Sat1PP 53 StuAPP 54 Sat1SP 133 StuASP 248
Sat2PP 109 StuBPP 98 Sat2SP 189 StuBSP 129
.. ..
.. ..
.. ..
NetPP 4 MainPP 56 NetSP 144 MainSP 145