4-002 Description of the Individual Assembly Groups
Machine Table Illustration 4-002-01
1 Table base
2 Support strip, front
3 Support strip, back
4 Fence, 720 mm long
5 Stop on ruler
6 Side stop, left
7 Side stop, right
8 Clamping lever for adjusting the depth of the fence (both sides )
9 Depth stop scale for drilling distance
Accessories, not included in standard equipment
10 Zero point for stop adjustment gauge
11 Pendulum stop
12 Pneumatic work piece hold down device, available only with Ecopress-Pneumatic
Motor Support Illustration 4-002-02
1 Gearbox plate / Motor support
2 Guide bushes for motor support
3Guide columns
4 Drilling depth stop
5 Gear box cover
6 Gear shaft
7 Insertion arm
8 Distance spacer - Motor holding fixture
9 Motor with switch that can be shut off
10 Pneumatic cylinder, available only for Ecopress-Pneumatic
11 ldentification plate with style, manufacturing year, machine number, standard voltage and standard
frequency .........
To Next Page
Loading...
