Technical Data
Dimensions:
Width of machine table 720 mm
Depth of machine table with bore distance 20 mm 300 mm
Height of machine table 75 mm
Total height of machine 665 mm
Total depth of machine 455 mm
Other data:
Press force of 0,6 MPa ( 6 bar ) about 2800 N
Weights:
Total weight of the Ecopress-Pneumatic standard equipment 45 Kg
Total weight of the Ecopress-Manual standard equipment 36 Kg
Electric Connections:
Voltage according to the identification plate ........ V
Frequency according to the identification plate ........ Hz
Connection capacity of 3 phase motors 1,5 kW
Connection capacity of 1 phase motors 1,1 kW
Power of the supply line according to the local codes and regulations, but at least 1.5 mm 2
Securing the supply line with a maximum 1.5 x nominal current according to the identification
plate with a maximum, nevertheless of 16 A.
Pneumatic Connections (only with Ecopress-Pneumatic):
Dustfree, waterfree and oilfree air pressure at least 5,5 bar
Maximum allowable pressure in supply line 10,0 bar
Air pressure usage per stroke motion with 6 bar 1,25 l
Air pressure usage per stroke motion,
Suction capacity for compressor 7,5 l
Other connections (only with Ecopress-pneumatic):
Dust collection: connecting diameter Ø 80 mm
Suction capacity about 2000 m3/h
Emission values:
Noise level in neutral 92,6 dB/A
Noise level during drilling 93,8 dB/A
Dust emission in the air with the Ecopress-Pneumatic 0,48 mg/m3
For details on emission values, see chapter 3-001
To Next Page
Loading...
