46
Service Search Object (SRVC)
A Service Search Object (SRVC) is similar to a LMIT search but is optimized
for a specific radio service, and can search for activity associated with a
type of service across multiple frequency bands.
Essential Service Search parameters
The only critical parameter needed for a Service Search to function is the
service type. When you set up a Service Search, you will want to specify the
type of service that you wish to search.
To create a new SRVC object, press PROG to place your scanner into
Program Mode, then press the
NEW
softkey, then press the
SRCH
softkey
to view the available Search types, then press the
SRVC
softkey. Scroll to
the
Srvc:
field and select the type of search you want to define using
the
34
keys on the 5-way pushbutton pad. Service types include Public
Safety, Aircraft, Amateur, CB, Marine, FRS/GMRS/MURS/DOT and Railroad,
and provide frequency coverage as follows:
Public Safety (PubSafety) - Searches commonly used public safety
frequencies. Groups are as follows:
0: 33.42-46.5 MHz VHF Low Band
1: 151.82-170.15 MHz VHF High Band
2: 453.0375-467.7125 MHz UHF Band
3: 764.003125-766.996875 MHz 700 MHz Band
769.003125-775.998675 MHz
794.003125-796.996875 MHz
4: 806.0125-868.0875 MHz 800 MHz Band
Aircraft - Searches civilian and military air frequencies. Groups are as
follows:
0: 108-118 MHz Navigation
1: 118-137 MHz Civilian Voice
2: 138-150 MHz Military Voice (excludes 2m Amateur)
3: 225-400 MHz Military Voice
Ham - Searches amateur radio frequencies. Groups are as follows:
0: 28.0-29.7 MHz 10m Band
1: 50-54 MHz 6m Band
2: 144-148 MHz 2m Band
3: 222-225 MHz 1.25cm Band
4: 420-450 MHz 70cm Band
5: 902-928 MHz 33cm Band
6: 1240-1300 MHz 23cm Band
To Next Page
Loading...
