Greenlee Textron / Subsidiary of Textron Inc.
58
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
855 Smart Bender™
Troubleshooting (cont’d)
PROBLEM PROBABLE CAUSE POSSIBLE REMEDY
UNLOAD key does not work. Roller support locking cam is engaged. Release the roller support or adjust
retension cam.
Unloaded to the starting position. Release and repress UNLOAD.
Locking cam will not engage. Too much squeeze on 1-1/2" or 2" EMT Back squeeze off per adjustment
or IMC conduit. instructions.
Shoe rotated too far in unload Rotate shoe with BEND key until
direction. locking cam will engage.
Bend key does not work for Roller support locking cam is engaged. Release the roller support or adjust
1/2 - 1-1/4" conduit. retention cam.
To Next Page
Loading...
