Greenlee 855 - Specifications

Greenlee Textron / Subsidiary of Textron Inc.
6
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070
855 Smart Bender™
Specifications
Height.................................................................................................... 1200 mm (47")
Width .................................................................................................... 724 mm (28.5")
Depth ................................................................................................... 902 mm (35.5")
Mass/Weight (bender without shoes or roller supports) ....................... 231 kg (510 lb)
Power Supply................................................................. 120 VAC (80 VAC minimum),
18 to 20 amp GFCI-protected circuit
Power Output ...................................................................................................... 2.5 hp
Operating Conditions
Temperature .......................................................... 0 °C to 38 °C (32 °F to 100 °F)
Relative Humidity ..................................................................................... 0 to 98%
Capacity .............................................................................................1/2" to 2" conduit
Bending head shown in the
horizontal bending table position.
Balanced bending head pivots easily as it is changed from the vertical
bending position to the horizontal bending table position.
Bending head shown locked in the
vertical bending position.
Size 1/2" 3/4" 1" 1-1/4" 1-1/2" 2"
EMT 4-5/16" 5-1/2" 7" 8-13/16" 8-3/8" 9-1/4"
IMC, PVC
4-1/4" 5-7/16" 6-15/16" 8-3/4" 8-1/4" 9"
and Rigid
Conduit Centerline Bending Radius