Grizzly G0458Z User Manual

-46-
Model G0458Z (Mfd. Since 7/19)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0458Z
grizzly.com
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when
using this machine.
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
Use G9987
4.93" x 2.4"
MODEL G0458Z
18" OPEN-END DRUM SANDER
Motor: 1.5 HP, 120V, 1-Phase, 60 Hz, 13.92A
Drum Speed: 2600, 3400 FPM
Feed Rate: 0–12 FPM
Sanding Drum Diameter: 4"
Maximum Sanding Width Per Pass: 18"
Maximum Stock Width: 36"
Maximum Stock Thickness: 4-1/2"
Minimum Stock Thickness: 1/8"
Minimum Stock Length: 6"
Sandpaper Width: 3"
Sandpaper Length: 89"
Weight: 198 lbs.
Specifications
Date
S/N
Mfd. for Grizzly in China
To reduce the risk of serious injury while using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved eye protection and respirator.
3. Only plug power cord into a grounded outlet.
4. Never place hands near or in any opening during operation.
5. Never touch moving sandpaper or conveyor belt.
6. Never sand more than one board at a time.
7. Make sure sander is properly assembled, adjusted, and stable before
operating. Only operate with all guards in place.
8. Be aware of pinch points located at the edge of conveyor.
9. Only remove jammed pieces when machine is stopped and
disconnected from power.
10. Turn motor OFF and disconnect power before changing sandpaper,
making adjustments, or servicing.
11. Do not wear loose clothing, gloves, jewelry, or other articles that can
get entangled. Tie back long hair and roll up sleeves.
12. Do not expose to rain or use in damp locations.
13. Do not operate under influence of drugs or alcohol, or when tired.
14. Prevent unauthorized use by children or untrained users; restrict
access or disable machine when unattended.
WARNING!
3092372
201
202
203
204
205
206
207
208
209
210
211
202
Labels & Cosmetics
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes
off or becomes unreadable, the owner of this machine MUST replace it in the original location
before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
REF PART # DESCRIPTION REF PART # DESCRIPTION
201 P0458Z201 ENTANGLEMENT WARNING LABEL 207 P0458Z207 INJURY/SHOCK HAZARD WARNING
202 P0458Z202 ELECTRICITY LABEL 208 P0458Z208 TOUCH-UP PAINT, GREY PUTTY
203 P0458Z203 READ MANUAL WARNING LABEL 209 P0458Z209 GRIZZLY.COM LABEL
204 P0458Z204 EYE/LUNG HAZARD WARING LABEL 210 P0458Z210 TOUCH-UP PAINT, GLOSSY BLACK
205 P0458Z205 GRIZZLY NAME PLATE (MINI) 211 P0458Z211 MACHINE ID LABEL
206 P0458Z206 MODEL NUMBER LABEL

Grizzly G0458Z Specifications

General

Brand	Grizzly
Model	G0458Z
Category	Sander
Language	English