Model T33903/T33904 (Mfd. Since 07/23)
-9-
The information contained herein is deemed accurate as of 1/2/2024 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 2 OF 3
Model T33904
Main Specifications:
Operation Information
Type........................................................................................................................................................... Floor
Swing......................................................................................................................................................... 20 in.
Spindle Taper............................................................................................................................................ MT#4
Spindle Travel........................................................................................................................................ 4-1/2 in.
Max. Distance From Spindle to Column.................................................................................................... 10 in.
Max. Distance From Spindle to Table................................................................................................. 28-5/8 in.
Number of Spindle Speeds............................................................................................................................. 12
Range of Spindle Speeds......................................................................................................... 210 - 3020 RPM
Drilling Capacity (Mild Steel)........................................................................................................................ 1 in.
Drilling Capacity (Cast Iron)................................................................................................................... 1-1/4 in.
Drill Chuck Type......................................................................................................................... JT3 Key Chuck
Drill Chuck Size................................................................................................................................ 1/8 - 5/8 in.
Spindle Information
Distance From Spindle to Base........................................................................................................... 47-1/8 in.
Quill Diameter....................................................................................................................................... 2.441 in.
Table Information
Max. Table Tilt (Left/Right)................................................................................................................ 0 - 45 deg.
Table Swing.......................................................................................................................................... 360 deg.
Table Swivel Around Column............................................................................................................... 360 deg.
Max. Movement of Work Table............................................................................................................ 22-3/8 in.
Table Length...................................................................................................................................... 16-5/16 in.
Table Width......................................................................................................................................... 18-1/2 in.
Table Thickness.................................................................................................................................... 1-1/2 in.
Vertical Table Travel..................................................................................................................... Crank Handle
Number of T-Slots............................................................................................................................................ 2
T-Slot Size.............................................................................................................................................. 9/16 in.
T-Slot Centers....................................................................................................................................... 7-1/8 in.
Floor-To-Table Height............................................................................................................ 22-1/8 - 44-1/2 in.
Construction
Table....................................................................................................................... Precision-Ground Cast Iron
Column....................................................................................................................................................... Steel
Spindle Housing................................................................................................................................... Cast Iron
Head.................................................................................................................................................... Cast Iron
Base..................................................................................................................................................... Cast Iron
Paint Type/Finish....................................................................................................................... Powder Coated
Other Related Information
Base Length........................................................................................................................................ 22-1/2 in.
Base Width.......................................................................................................................................... 16-1/2 in.
Column Diameter................................................................................................................................... 3-5/8 in.
Quill Flange/Collar Diameter........................................................................................................................ 3 in.
Quill Hold Type...................................................................................................................... Slotted Set Screw
Depth Stop Type................................................................................................ Threaded Rod w/Positive Stop
Has Work Light............................................................................................................................................. Yes
Light Socket Type................................................................................................................................ LED 12V
Maximum Bulb Wattage................................................................................................................................ 3W
Has Laser Guide.......................................................................................................................................... Yes
Laser Classification................................................................................................................................ Class II
Laser Wavelength................................................................................................................................... 650 nm
Laser Maximum Output.............................................................................................................................. 1mW
To Next Page
Loading...
Need help?
General
