41
APCD-500, rev10
APCD-500
6. TECHNICAL SPECIFICATIONS
Type ..................................APCD-500
Main supply fuse F1 ............. F1A, 250V, fast-blow
Main supply/frequency ........ 230V+10% -20%, 12A, 50/60Hz
Housing ............................. Plastic casing
Operating temperature ........0 to 40°C
Storage temperature ........... -15 to 50°C
Ambient relative humidity ...Max 95% (non-condensing)
Alarm ................................10mA to 2A, 24 Vac or Vdc max
Auger motor ......................230Vac/1HP max, 115Vac/1/2HP max
Internal contactor ............... 230Vac / 2HP max
Nema Code Letter: ......... A to L max
Full-load amps (FLA): ......13A max
Locked rotor amps (LRA): 170A max
Running a motor with higher ratings could result in potential
controller damages and/or fire. If the Nema Code Letter
is not available, exclusively use the LRA ratings!
Actuator/Air valve ................ 230Vac max, 5A max
Trouble light ....................... 500W max, 115VAC
Installation category ...........Category II : Overvoltage category
Pollution degree .................2
Altitude .............................Up to 2000m
The room temperature where the controller is located
must always remain between 32 and 104°F (0 and
40°C). For indoor use only!
To Next Page
Loading...