GSi Chain Disk APCD-500 User Manual

Removing a Core Card:
Before proceeding, switch power off
at service panel and lock the switch
disconnecting means to prevent
power from being switched acciden-
tally. When the service disconnecting
means cannot be locked, securely
fasten a prominent warning device,
such as a tag, to the service panel.
1. Use your thumbs to move away the two
metal arms that are retaining the card. While
doing so, lift the card upwards with your
index fingers.
2. Pull the card out of its connector.
Inserting a Core Card:
Before proceeding, switch power off
at service panel and lock the switch
disconnecting means to prevent
power from being switched acciden-
tally. When the service disconnecting
means cannot be locked, securely
fasten a prominent warning device,
such as a tag, to the service panel.
1. Give the card a 45-degree angle before
inserting it in the connector.
2. Once it is inserted, the card wil stand at
the 45-degree position.
3. Press on the card and make it clip to the
main board.
ANNEX 1: CORE CARD
44
APCD-500, rev10
APCD-500

GSi Chain Disk APCD-500 Specifications

General

Brand	GSi
Model	Chain Disk APCD-500
Category	Controller
Language	English