GTO PRO 2000 - Accessories and Other Products from GTO, Inc.; Opening Accessories

37
Accessories
and Other Products
from GTO, Inc.
GTO Entry Transmitter (RB741)
The GTO Entry Transmitter, with adjustable code settings is stan-
dard equipment with all GTO gate operator systems. Battery in-
cluded.
GTO Dual Transmitter (RB742)
GTO Triple Transmitter (RB743)
The two and three button transmitters are used for the remote
control of two or three gate operators and/or garage door
openers (See Garage Door Receiver). Battery included.
GTO Key Chain Mini Transmitter (RB744)
The Key Chain Mini Transmitter is a miniature ver-
sion of the GTO entry transmitter and has the same
adjustable code settings. Battery included.
Garage Door Receiver (RB709)
Allows the use of the same GTO remote transmitter (see
Dual and Triple Transmitters) to control the gate operator
and garage door opener. Compatible with most garage door
openers.
HEDDOLF
UNIVERSAL
RECEIVER
MODEL 294
Push Button (doorbell) Control (RB101)
Unlit doorbell button for remote entry or exit control. Wires directly
to the control board using 16 gauge, stranded, direct burial, low
voltage wire (not included).
GTO Digital Keypad (F300)
The specially designed weatherproof digital keypad can be easily installed as a wireless
or wired keypad for swing and slide gate operators, or as a wired keypad for the Bulldog
Pedestrian Gate Lock. It can be programmed to use up to fifteen different personal
identification number (PIN) codes. Each code is face programmable with additional
security features built in. Requires 3 AA batteries (not included). Can also accommodate
most garage doors and other gate openers. If used as a wired keypad, GTO low voltage,
16 gauge, dual conductor, multi-stranded, direct burial wire will be required.
12
3
65
4
7
8
9
0
See your dealer for complete catalog of GTO operators and accessories.
Opening Accessories