4
SPECIAL NOTES FOR THE CUSTOMER / END USER
Read and follow all safety precautions. Be certain you have thoroughly reviewed these safety precautions with your
installer:
1. Distribute safety instructions to all persons authorized to use the gate operator.
2. KEEP CLEAR OF THE GATE AND AREA OF GATE TRAVEL at all times. This automatic gate operator is not
for pedestrian use. If pedestrian traffic is expected near the gate, a walk-through gate should be installed for this
purpose.
3. Do not allow children or pets near the gate.
4. Do not activate the gate operator unless you can see it and can determine its area of travel is clear of children, pets
or any other obstructions.
5. If push buttons, keypads or keyswitches are installed, they should be within sight of the gate, yet located far enough
from the gate (at least ten ft.) so the gate cannot be touched while in operation. Do not activate any control without
watching movement of the gate.
6. Do not use the sensitivity adjustments to compensate for a poorly installed or damaged gate. The gate should always
be maintained to operate manually as easily as possible; periodic gate/operator inspections and maintenance should
be scheduled. (See Maintenance and Troubleshooting, pages 33 and 34)
7. Have all safety systems checked periodically. If these functions are observed to operate improperly, discontinue use
and have operator serviced immediately.
8. To operate this equipment safely, YOU must receive detailed instructions on the operation of the manual discon-
nect. If you feel you haven’t received full and proper instructions, contact your installer.
9. It is your responsibility to make sure that the installer posted GTO's caution signs on both sides of your gate. If any
of these signs or caution decals become damaged, illegible or missing, replace them immediately. Contact your
installer or GTO for replacement.
10. Read this manual and keep it for reference.
To Next Page
Loading...
