10.2 Disposal
Your product consists of the following units:
• Packaging
• Contaminated materials / auxiliary agents (oil paper)
• Wood
• Plastic (film)
• Consumables
• Lubricants (oils/greases)
• Batteries
• Base unit
• Metals (steel/aluminum)
• Plastics (thermoplasts/duroplasts)
• Contaminated materials / auxiliary agents (felt / cleaning cloths)
• Electrical material (cables)
10.3 Waste management compliant assemblies
10.3.1 Disassembly
CAUTION
Oil, greases
Oils and greases are harmful to the environment!
• The oils and greases must not get into the drinking water supply. Take ap-
propriate measures
• Observe the country-specific safety data sheets
• Oils and greases must be disposed of as hazardous waste, even if the total
quantity is small
Disassemble the product as follows:
Prerequisite:Prior to disassembly, shut down the product
1 Remove the connecting elements (cables / energy chains)
2 Disassemble assemblies
3 Disassembly the assemblies and separate the different materials
The product has now been disassembled.
Disposal
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_EN-US
100
To Next Page
Loading...